This UL-listed ergonomic load center is said to cut installation time by 25 percent while eliminating 50 percent of repetitive-motion work and greatly reducing the risk of repeated-trauma injuries. Ready-to-wire Insta-Wire circuit breaker screws eliminate the need to back out screws before inserting wire. Neutrals and grounds provide quick and easy neutral conductor installation, and visible neutrals make insertion of neutral conductors easier. The load centers are main convertible from main lug to main breaker. Factory-installed visible ground bars are used on main lug devices. Siemens Energy & Automation Inc.
Circle 260 on Reader Service Card

The Models CA811 and CA813 are portable, easy-to-use instruments that feature an optical, removable sensor that is designed to match the response of the human eye, making them suitable for workspace analysis and planning.

The accurate, economical and fast-responding instruments measure illumination on four ranges in either footcandles or lux, from 0.1 to 20kfc/klux. The Model CA813 offers a higher sensitivity fifth range to 200klux and has a better spectral response to common light sources. Features also include a 3½-digit backlit LCD display as well as peak, hold and max functions. The meters include a protective, safety yellow holster. AEMC
Circle 261 on Reader Service Card

The Fire-Guard arc-fault circuit interrupter (AFCI) can protect against arc faults, a major cause of residential fires. An AFCI has the ability to detect many types of arc-faults in home wiring and turn the power off to the electrical circuit, reducing the potential for a fire to occur. This AFCI combines arc fault technology with conventional circuit breaker protection against short circuits and overloads. Cutler-Hammer
Circle 245 on Reader Service Card

The liquid-tight Type Computer Blue LA (CBLA) electrical flexible conduit, intended for computer power wiring, features a flame-retardant jacket and is UL listed and CSA certified. It is available in trades sizes from 3/8-inch through 4 inches, with inside bend radii from 2 inches to 12 inches. The 3/8-inch through 1-1/4-inch sizes contain an integral bonding strip of copper, while the 1-1/2-inch and larger sizes are designed with a fully interlocked strip. Type CBLA is suited for temperature ranges from 20° C and 60° C. Electri-Flex Co.
Circle 263 on Reader Service Card

Ergolight is an office direct/indirect fluorescent lighting fixture that integrates occupancy sensors, personal dimming controls, daylight dimming and facility-wide scheduling to aggressively save energy. Ledalite Architectural Products Inc.
Circle 264 on Reader Service Card

These plastic-coated, shatter-resistant lamps are said be the first protective lighting products to achieve UL classification. In addition to achieving UL certification, Shat-R-Shield's products are NSF certified. This insures that Shat-R-Shield products are safe for contact with food. UL certification confirms that Shat-R-Shield products meet or exceed rigorous UL environmental and public health safety standards. Shat-R-Shield
Circle 265 on Reader Service Card

The Clarity Cat. 6 110 Block Kits are said to be the first completely standards compliant connectivity system. The blocks exceed TIA Cat. 6 (draft 10) component compliance within the footprint of standard 100-pair and 300-pair blocks, and are designed specifically for high-density termination of TIA-recommended four-pair horizontal cable. They will accommodate 24 cables in the 100-pair footprint and 72 cables in the 300-pair footprint. Ortronics
Circle 266 on Reader Service Card

This large frame family of Sirius 3R contactors and overload relays comes in three sizes rated from 115A to 500A that can be used for either AC or DC applications. Simple coil replacement and common accessories across the entire Sirius 3R product family are available. Sirius 3R is a modular system of contactors, overload relays, motor starter protectors, control relays and timers with a compact design to save cabinet space and speed installation. All three sizes of the large frame Sirius 3R contactors have an easy access AC/DC coil system featuring a “Universal Current” (UC) coil rated for both AC (40Hz through 60Hz) and DC voltages. Only 13 different coil ranges can cover control voltages from 24V to 600V AC and DC. Siemens Energy & Automation Inc.
Circle 267 on Reader Service Card

The Series B, Industrial Control Transformer product family is encapsulated, copper wound with IEC 707/ISO Class 1210 molded terminal blocks. Primary and secondary fuse holders are included in the new Series B transformer product family. Standard NEMA power ratings from 50VA through 1,000VA are also available. The transformer is available in two popular voltage configurations. Transformers are encapsulated to seal the transformer windings against moisture and industrial contaminants. Extra deep, molded terminal barriers reduce the chance of electrical failure and the rugged steel frame construction is best suited for all industrial environments. Sola/Hevi-Duty
Circle 268 on Reader Service Card

These UPSs offer affordable backup power for workstations and servers in packages said to be 50% smaller and lighter than comparable systems. Using a breakthrough in high-frequency switching technology, the Ellipse Premium units are designed to provide users with a combination of performance, reliability and size. Available in power ratings from 500VA to 1,200VA, the desktop and rackmount units maximize the power availability of workstations and small servers. Microprocessor controlled charging extends battery life up to 50%, while smart battery management assures advanced warning when batteries eventually need replacement. They are easy to use and are fully Plug-and-Play compatible with Windows 95, 98, 2000 and NT. MGE
Circle 269 on Reader Service Card

A space-saving accessory item has been added to the company's standard product line of reeling and spooling machinery. These reel-stacking units eliminate the clutter and inefficient use of floor space when reels are not stacked, and also prevent the need to flip reels from one position to another when stacking reels on their side. They allow multiple reels of the same size to be transported and stacked for storage to maximize floor space. Two standard sizes are available to handle reels in two or three separate compartments and are provided with forklift slots for easy access and rounded flange supports to prevent any damage to reels. Reel-O-Matic
Circle 270 on Reader Service Card

SAMI fuse covers help to comply with NFPA70E, Standard fro Electrical Safety Requirements for Employee Workplaces. For example, the “dead front” design complies with Part 2, Chapter 2, Section 2-3.8, Protective Shields. These shields are designed to help protect employees from shock and accidental contact while working near live parts. The fuse covers feature an indicating light on the cover that shows when the fuse is open. The easy-to-locate indicator significantly reduces downtime by making troubleshooting easier. Copper Bussmann
Circle 271 on Reader Service Card

Flexel EMT flexible fittings provide electrical contractors with an innovative, time-saving way to couple lengths of EMT together, or to connect EMT to a panel board or junction box where a change of direction is required in the conduit run, without the need to lug a heavy bending machine into the field. Available in 1-1/4-inch to 4-inch trade sizes, the fittings are hand-bendable, so contractors get the exact angle they need. The fittings are suitable for indoors and dry locations wherever EMT is used as a raceway. It will safely conducts the maximum ground fault current required by UL, CSA and the NEC. O-Z/Gedney
Circle 272 on Reader Service Card

This line of industrial PL (Power Light) plugs and connectors are well-suited for any workplace environment where quick visual identification of power status is desired for enhanced safety or convenience. The plugs and connectors contact a factory-assembled, prewired power light located in the body of the device. It emits a glow through the transparent lens on either the plug or connector when the power is “on.” When the devices are de-energized and current is no longer present, the power light switches “off.” Leviton Manufacturing Co.
Circle 273 on Reader Service Card

The UNITAP line of insulated multiple tap connectors has been expanded to include a mount version. The mount version is outfitted with two isolated mounting holes, which can hold up to ¼-inch standard hardware. These holes, located at both ends of the connectors, allow for director mounting to trough, gutter or any wire way. The preinsulated aluminum multiple-tap connectors are dual rated for copper and aluminum applications with multiple configurations to accommodate a variety of applications. FCI Burndy
Circle 274 on Reader Service Card

Want to use this article? Click here for options!
© 2007 Penton Media, Inc.